1/458 Middleborough Road ,BLACKBURN, 3130
+61 3 9890 4833

2018 Technical Program

Full Program

As at 04/09/2018

 

PF Thomson Lecture

Professor Brian Kinsella

Curtin University, Australia

Dr Laura Machuca

Curtin University, Australia

Miles Buckhurst

Jotun, Norway

Assoc. Proff Geoffrey Will

Queensland University of Technology, Australia

Paul Vince

WSP Opus, Australia

David Lake

Private Consultant

Technical Program
as at 8 August 2018

Below is a list of papers is based of abstracts received which have been provisionally accepted for Corrosion & Prevention 2018 by the Conference Technical Committee.

Submitted papers will be subject to a peer review process before they can be officially accepted for Corrosion & Prevention 2018.

AuthorCompanyAbstract
Asset Management
Celine, Mr DavidOmniflex Pty LtdEnterprise Wide Monitoring of Corrosion in Assets
Czerwinski, Dr AndrewInfracorr ConsultingDegradation of Mechanical Properties for Galvanized Guy Wires due to In-Service Corrosion
Ghodkay, VarunCurtin UniversityCompatibility of epoxy coatings in monoethylene glycol solutions: long term evaluation of coating performance
Haberecht, Dr PeterMaterials and Environments (MATENV Power)Atmosphere Corrosivity Assessment of South Australia: Two Year Study (2017)
Huggett, Dr PaulApplus RTD Pty LtdStress Corrosion Cracking of Autoclave Steam Coils
Northwood, Professor DerekUniversity of WindsorCorrosion and Society
Sequera, Mr NestorSN IntergrityPermanent Installation of Passive Wireless Ultrasonic Sensors for Internal Corrosion Monitoring
Shaw, Dr PatriciaCallaghan InnovationSynchrotron Studies for Corrosion Research
Shibi, Mr NaamanTechs4Biz AustraliaElectronic inspection - Using mobile devices to manage assets and inspect corrosion
Tripathi, Mr NarendraRMS, TfNSWSafely Maintaining Aging Assets
Coatings Application
Cicak, Mr IviNational Facility for Pipeline Coating AssessmentDetermining the required voltages for holiday testing dual layer fusion bonded epoxy coatings
Hughes, Professor AnthonyDeakin UniversityThe Role of Computed Tomography in Understanding Inhibitor Release from Coatings
Lyons, Dr ChristopherDefence Science and Technology GroupAnticorrosive Performance of Less Hazardous, Environmentally Friendly Coating Systems Designed for Military Aircraft
Varela, Mr BobDeakin UniversityAccelerated Validation of Pipeline Corrosion Monitoring Sensors
Concrete - Cathodic Protection of Reinforcement
Whitmore, DavidVector Corrosion Technologies Ltd.Investigating and Resolving Bridge Grouted PT-Strand Corrosion Problems
Whitmore, DavidVector Corrosion Technologies Ltd.Two-Stage, Self-Powered, Modular Corrosion Protection System for Reinforced Concrete Structures
Concrete - coatings & repair
Green, Mr WarrenVinsi Partners‘Do Nothing’ and Patch Repair (without Anodes) Engineered Maintenance Experiences of Marine Concrete Structures
Ward, Mr WilliamPapworths Construction Testing EquipmentProposed Recommended Practice for Coating Dry Film Thickness Measurement Over Concrete
Concrete - deterioration
Khan, Mr Hammad AnisThe University of New South WalesNeutralization and Corrosion of Geopolymer mortar in an Aggressive Sewer Environment
Kilgour, Mr RobertWSPDurability of Concrete in Tunnels
Salek, Dr ShamilaGHDMaterials Characterisation and Concrete Durability
Concrete - Reinforcement corrosion
Ferguson, Mr DeanInfracorr ConsultingA Theoretical and Practical Review of Half Cell Potential Measurements for Assessing Reinforcement Corrosion
Papworth, Mr FrankBCRCDurability Design Developments For fib Model Code 2020
Papworth, Mr FrankBCRCDurability Design for Concrete Immersed in Seawater or Brine
High temperature corrosion
Aye, Mrs Khaing KhaingSchool of Materials Science and Engineering, UNSWChlorine-induced Corrosion of Chromia Forming Alloys in Wet Atmosphere at 650°C
Zhang, Dr JianqiangUNSWCorrosion behaviour of Ni-Cr alloys in oxygen at high temperature
Non-ferrous metal corrosion
Chaves, Dr IgorThe University of NewcastleSyntactic Perlite-Aluminium Long-Term loss of Mechanical Properties Immersed in Ocean and Fresh Waters
Fosdike, Mr DanielASC ShipbuildingCase studies from Shipbuilding in South Australia
Jacob, Mr SimonBAE Systems AustraliaRelating Wettness and Corrosion Using In-Field Environmental Sensor Data
Liang, Miss MengxiaThe University of NewcastlePitting Corrosion of 5005 Aluminium Alloys in the Temperate Seawater Immersion Environment
MacLeod, Dr IanHeritage Conservation SolutionsCorrosion potential study of the Western Australian 1911 Coronation medal
Neil, Dr WayneDefence Science and Technology GroupCorrosion Performance of Alternate Marine Hull Valve Materials
Oil & Gas - Cathodic protection of pipelines
Brodribb, Mr RichardM. Brodribb Pty LtdBode Plot or Backhoe, Stable Rectification on Well Coated Pipes
Cao, Ms QingMonash UniversityOn the detection and mitigation of corrosion under insulation of mild steel
Latino, Mr MaxDeakin UniversityCP Permeable Coating and Corrosion under Disbonded Coatings
Oil & Gas - Marine structures
Sunaba, Dr ToshiyukiINPEXCorrosion Resistance of OCTG 17Cr Martensitic Stainless Steels for HP/HT Wells
Welsford, Mr PaulFlexitallic UK LtdFlange Face Corrosion in Seawater and Hydrocarbon Environments Related to Gasket Material Selection
Zhu, Mr YesenDalian University of TechnologyThe Probing of Pipeline Localized Corrosion Using a Novel Designed Electrical Resistance Sensor Array
Oil & Gas - Refinery issues
Carlisle, Mr GrahamIAS Group Pty LtdLiquid Thermal Insulation Coatings (TIC): A Practical Method to Mitigate Corrosion Under Insulation (CUI)
Dankiw, Mr RomanAsset Inspection Consultants Pty LtdCorrosion Repairs on Pressure Equipment
Other Corrosion issues
Habib, Professor KhaledMaterials Science and Photo-Electronics LabPrediction of Energy Rfficiency of Iron–Boron–Silicon Metallic Glasses in Aqueous Solutions
Steel Corrosion
Francis, Dr RobertR A Francis Consulting ServicesTen Years’ Experience with the Australian Corrosivity Standard
Hussain, Mr MuhammadAMCO Integrity Pty Ltd Reliability Issues of Austenitic Stainless Steel
Jeffrey, Dr RobertUniversity of NewcastleAtmospheric Corrosion of Mild Steel in a Desert Environment
Steel Corrosion - Cathodic protection of steel structures
Ackland, Dr BruceBruce Ackland and Associates Pty LtdTrue or False? Facts and Fallacies in Cathodic Protection
Al-Otaibi, Mr MohammedSaudi Aramco Pilot Testing of New CP System of Aboveground Storage Tank
Fatemi, Dr HamidRoads and Maritime ServicesHierachy of Quality for Avoiding Acidification in Cathodic Protection
Phang, Mr BobSMEC Pty LtdRecent Case History to Benchmark Best Practices in Protection Criteria of Buried Steel Structures
Steel Corrosion - Coating of steel structures
Chung, Ms Ping PingSwinburne University of TechnologyEffects of Heat Treatment on Mechanically Plated Zinc-Tin Coating and its Corrosion Performance
Dankiw, Mr RomanAsset Inspection Consultants Pty LtdDefining Mechanical Surface Preparation Standards with Power Tools
Li, Dr YongjiaSingapore PolytechnicFormulation of low VOCs surface tolerant anti-corrosive coatings by epoxy resin
Mandeno, Ing. WillieWSP OpusNew NZ Steel Durability Standard
Tan, Prof Mike YongjunDeakin UniversityRecent Progresses in Understanding Pipeline Coating Degradation
Wilson, Ms KerrynAECOMNo one cares about the paint – a specifier’s perspective
Steel Corrosion - Microbiologically influenced corrosion of steel
Salgar Chaparro, Mrs SilviaCurtin Corrosion CentreEffect of Sample Storage Conditions on the Molecular Assessment of MIC
Suarez, Mrs ErikaCurtin UniversityThe role of bacteria on Under-Deposit Corrosion in oil and gas facilities: A review of mechanisms, test methods and inhibition
Steel Corrosion - Steel in a marine environment
Catubig, Dr RainierDeakin UniversityInhibition at a polyurethane-based coating defect with lanthanum or imidazolinium 4-hydroxycinnamate
Gathimba, Mr NaftaryNagoya UniversityCharacterization of surface Topography for Corroded Steel Members Exposed to Marine Environments
Green, Mr WarrenVinsi PartnersIn-situ Corrosion Protection Performance Assessment of Petrolatum-Based Pile Wrapping Systems at the Tasman Bridge
Jardim do Nascimento, Ms BarbaraUniversity of NewcastleLong-Term Atmospheric Corrosion of Mortar Embedded Wall-Ties
Melchers, Professor RobertThe University of NewcastleLong-Term Corrosion of Steel Chains on Pacific Ocean Beach Sand
Ross, Dr NigelCallaghan InnovationCorrosion Behaviour of Powder Metallurgical Stainless Steels
Xu, Mr YunzeDeakin UniversityThe study of water-line corrosion in static and dynamically flowing electrolytes using multi-electrode sensor in combination with electrical resistance method
Water Infrastructure - Pipe corrosion and condition assessment
Liu, Mr LiangDalian University of TechnologyThe Monitoring of Erosion and Corrosion Using Electrical Resistance Sensor Combined with Electrochemical Method
Melchers, Professor RobertThe University of NewcastleFurther new interpretations of the corrosion of ferrous metals in soils
Petersen, Dr RobertThe University of NewcastleThe influence of soil moisture on the corrosion of mild steel in clays after one year of exposure
Water Infrastructure - Water treatment plant & waste water treatment plant corrosion
Afshari, Dr VahidGHD Pty LtdA Literature Review – Materials Selection for Intake Screens
Furman, Mrs SarahAECOMCrevice corrosion of super duplex stainless steel in high chloride environments
Vince, Mr PaulWSPFurther Observations on the Performance of Geomembrane Materials in Floating Cover Applications in Australia

The ACA Conference Technical Committee is pleased to announce that the 2018 ACA Technical Conference in Adelaide will feature a new Contractor Information ½ day hosted by conference supporter BlastOne at their premises in Adelaide.

The ½ day will feature information sessions on abrasive blasting and other contractor application and surface preparation tools that have advanced features and efficiencies. The complete program will be detailed when finalised.

The ACA is also pleased to announce that there will be special offers of attendance at the Conference Exhibition for local South Australian contractors and applicators and these details will also be advised once they are finalised.